Rebar Tie Wire & Tools
Rebar Tie Wire & Tools
3.5lb coil rebar tie wire and automatic twisters for concrete reinforcement
- Material
- Annealed Black Steel Wire
- Wire Gauge
- 16-18 BWG (1.2-1.6mm)
- Coil Weight
- 1.6 kg (3.5lb) / 25kg / 100kg
- Format
- Coils / Pre-cut loops
- Softness
- Easy hand twist
Product Description
WANSUN Rebar Tie Wire is annealed black wire specifically designed for tying rebar intersections in concrete reinforcement. Available in 3.5lb (1.6kg) coils for manual tying and bulk coils for automatic rebar tying tools. The wire is engineered for optimal softness for easy twisting while maintaining sufficient tensile strength to hold rebar securely.
Full Specifications
| Material | Q195 low carbon steel, annealed |
|---|---|
| Wire Diameter | 1.2mm (18 BWG), 1.4mm, 1.6mm (16 BWG) |
| Coil Weight | 1.6 kg (3.5lb), 5 kg, 25 kg, 100 kg |
| Pre-Cut Lengths | 100mm, 150mm, 200mm, 250mm, 300mm (loop ties) |
| Tensile Strength | 300-400 MPa (soft annealed) |
| Elongation Rate | 15-25% |
| Surface Finish | Black (oxide coating) |
| Annealing Type | Batch annealing in controlled atmosphere |
| Wire Form | Coil (continuous), Pre-cut straight, Loop ties |
| Tool Compatibility | Works with all automatic rebar twisters |
| Packing | Plastic wrapped, carton packed, pallet loading |
| Standards | ASTM A641 (annealed), ACI 315 |
Key Features
Optimal Softness
Annealed to the perfect softness for fast hand-twisting without wire fatigue.
3.5lb Standard Coils
Industry-standard 3.5lb coil size fits all rebar tying tool magazines and belt pouches.
Pre-Cut Loop Ties
Pre-cut loop ties in various lengths save time and reduce waste on construction sites.
Tool Compatible
Compatible with all major automatic rebar twister brands for high-speed tying.
Applications
Rebar Tying
Concrete Reinforcement
Construction Sites
General Binding
Frequently Asked Questions
What wire gauge is standard for rebar tying?
16 BWG (1.6mm) is the most common gauge for manual rebar tying. For automatic rebar twisters, 18-19 BWG (1.0-1.2mm) is typically used as the tool feeds and twists lighter wire. Both gauges provide adequate strength to hold rebar intersections during concrete pouring.
Can this wire be used with automatic rebar twisters?
Yes, we supply wire specifically for automatic rebar tying tools in tool-compatible coil format. The wire is wound onto special spools that fit standard rebar twister magazines. Compatible with Makita, MAX, and other major brands.
What are pre-cut loop ties and when should I use them?
Pre-cut loop ties are pre-cut lengths of wire with looped ends, designed for specific rebar intersection sizes. They save time on site by eliminating measuring and cutting. Use them when you have many identical rebar intersections (e.g., grid-pattern slabs with consistent bar spacing).
How many ties can I get from a 3.5lb coil?
From a 1.6kg (3.5lb) coil of 1.6mm wire, you can make approximately 200-300 ties depending on tie length. For 1.2mm wire, expect 300-500 ties per coil. For bulk construction projects, we recommend ordering by the pallet (typically 20-40 coils per pallet).
